World Archives Keying Standards
The following are keying standards for the Ancestry World Archives Project. Ancestry World Archives Keying Standards are general guidelines on how projects in AWAP should be keyed. If there are instances that are unclear or are not covered in the Wiki Article consult the Keying Standards. When the General Standards do not contain the answer, a questions should be asked.
Be aware of the possibility that some projects require special treatment. Special treatment might mean that the Wiki Article and the Keying Standards do not agree. In these scenarios, information in the Wiki Article trumps the Keying Standards for that particular project. However, do not apply project-specific instructions to other projects.
- - If neither the Wiki Article nor the Keying Standards address a particular point, keyers should:
- - Post a question to the Discussion Page in the Wiki Article.
- - Post a question to the appropriate message board.
- - Email the question to firstname.lastname@example.org
- 1 General Standards
- 1.1 Casing
- 1.2 Completeness
- 1.3 Crossed-Out Information
- 1.4 Dictionaries
- 1.5 Ditto Information
- 1.6 Illegible Characters - ??
- 1.7 “Key as Seen”
- 1.8 Punctuation
- 1.9 Record Sequence
- 1.10 Spacing
- 1.11 Special Characters/Diacritics
- 1.12 Duplicate Entries (Same name listed multiple times)
- 1.13 Multiple Spouses
- 1.14 Abbreviated Names
- 1.15 Pull information from one image to key on another
- 2 Field-Specific Standards
Casing is important and should be keyed as seen. For example, “denning” should not be keyed as “Denning” and “DeAngelo” should not be keyed as “Deangelo”. Note: If the entry is in all uppercase lettering, it should not be keyed that way unless the Wiki Article says to. In this instance, key using proper casing.
Fields should be keyed with all information that belongs together. For example, “St Martin in the Fields” would be wrong if it was keyed as only “St Martin” and “van de Kamp” would be wrong if it was keyed as “van Kamp”.
If information in a record has been crossed out and a correction has been written, key the correction. If no correction has been given, key as much of the crossed-out information as possible.
Ancestry provides dictionaries for specific fields to assist in accurate keying. Dictionaries are only to be used for fields specified in the Wiki Article.
When a matching value is found in the dictionary, it should be used. If a value is not found in the dictionary, key the information as seen. Do not abbreviate or expand terms, unless instructed in the Wiki Article.
Ditto marks are often used to indicate that the information is the same as in the preceding record. For example, the surname may be written once for the head of house while a ditto mark is used for other family members with the same surname. Dittos may also be used for dates, locations, and other field types.
The most common ditto mark is the double quotes ("). Another common ditto symbol, in English records, is the abbreviation for ditto, "do".
Do not key the ditto mark (“) or the abbreviation “do.” Key the correct information from the previous entry.
In some cases, other marks are used to indicate dittoed information. Other examples of ditto usage:
- - Dash or hyphen (-)
- - Single quote, hash mark, or tick mark, e.g. (')
- - Vertical line drawn down through a column
- - Blank space, where it is apparent from the layout that the information applies to subsequent records.
Caution: These other marks might also mean that the information is not known or does not apply. The Wiki Article may include instructions for recognizing other ditto marks.
Illegible Characters - ??
If one or more characters within a particular word are illegible, key all of the characters that are legible. Use double question marks (??) to represent the missing character or characters. If a word is entirely illegible, mark the field as illegible using ctrl-I or its corresponding button in the keying tool.
“Key as Seen”
Key as seen only when the Wiki Article instructs you to. When the instruction “key as seen” is given, it means that the following elements should be preserved:
- - Apostrophes, hyphens and ampersands
- - Casing
- - Completeness
- - Commas
- - Diacritics
- - Periods
- - Spacing
No additional characters should be introduced in keying, which do not appear on the image.
Apostrophes (‘) are important and should be keyed if they clearly appear on the image. For example “Coeur d’Alene” “St John’s Wood”. In instances such as M'Intosh the apostrophe is used in replacement of the superscript "c" so the name should be keyed as McIntosh.Apostrophes should not be added in keying when not present on the image.
Commas are important and should be keyed as seen when they are clearly present on the image. Commas should not be added in keying if they are not present on the image. For example, “St Thomas, Warwick” should be keyed as “St Thomas, Warwick” but “St Thomas Warwick” would be keyed as “St Thomas Warwick”.
Hyphens (-) are important and should be keyed if they clearly appear on the image. For example “Wilkes-Barre” and “Winston-Salem”Hyphens should not be added in keying when not present on the image.
Periods may be keyed as seen. For example, “St. Paul” should be keyed as “St. Paul”. Periods should never be added in keying when they are not present on the image. When keying initials, they may be separated with periods, if periods are found on the image, but initials should otherwise be separated with a space. For example, “K.B. Ellsworth” could be keyed as "K.B. Ellsworth" and “KB Ellsworth” should be keyed as “K B Ellsworth”.
Key records in the sequence that they are found on the image.
If the image contains multiple columns, with unique records side by side, these records are generally to be keyed by column, top to bottom, starting with the left-most column first.
Spacing is important and should be keyed as seen. For example, “MacDonald” would be marked wrong if it was keyed as “Mac Donald” and “van Buren” would be marked wrong if it was keyed as “vanBuren”
Characters with diacritical marks, such as the German umlaut a (ä) or the Spanish tilde n (ñ), are to be keyed with the correct diacritic. Do not key the letter without the diacritic. Do not use punctuation or other marks to substitute for the correct diacritic. This rule applies to all fields.
To enter international characters, click the International characters icon located in the menu bar just above the form where data is entered. Once the International Characters window appears, click the character that you wish to enter, then select the Insert button.
Duplicate Entries (Same name listed multiple times)
If the same exact name is listed multiple times on a record generally you will only key the name once. The exception to this is if the name is a secondary name and is listed in reference to a different person. An example of this is keying the parents' names for each sibling listed in the London School Admissions. (In these cases F3 comes in handy to copy the information from the field above.)
If there is an individual with multiple spouses but there is only one set of spouse name fields follow the instructions in the field help or Project Instructions on which to enter. If you do not find specific instructions enter the most recent spouse in the spouse name fields.
When working with names, you should always key them exactly as you see them. For example, if Wm is written on the image, key Wm. It would not be appropriate to assume it is an abbreviation and enter William. If there are abbreviated names with an apostrophe, for example Sam'l, key them as seen on the record.
Pull information from one image to key on another
Unless specifically stated otherwise in the project instructions, information should not be pulled from one image to key on another.
The age captured will be the age of the person at the time of the main event. Age is generally captured in the form of a numeral.
- - Valid ages include numeric digits between "0" and "120" or certain acceptable fractions for ages displayed in months only.
- - If an age includes years, months, and/or days key only the years. For example, “10 years, 7 months” would be keyed as “10".
- - If an age includes both a year and a fraction, key only the year. For example, “3 3/12” would be keyed as "3".
- - If an age appears only in months, key age as a fraction. For example, “7 Months” would be keyed as “7/12” and “18 Months” would be keyed as "18/12".
- - If an age is expressed in weeks, days, or hours, “0” (zero) should be keyed as the age. For example, “3 weeks” would be keyed as “0” and “8 weeks” would be keyed as “0”.
- - If the entry states, “Minor” leave the Age field empty.
- - If the record states that the individual is "in their 24th year" you would enter their age as 23. (Since they have not yet had their 24th birthday.)
Days will, in most cases, be a numeral between 1 and 31. There are times when the day will not have been recorded.
Whether a day is spelled out or in numerical form, it should be captured in its corresponding numerical form. For example, “Fifth” or “5th” or “05” or “5” would be keyed as “5”In the U.S.A. dates are recorded in mm/dd/yyyy format while in the UK, and many other countries, the date is recorded in dd/mm/yyyy format.
A dictionary will generally be provided for a month field.
When a calendar month is spelled out, it should be captured from the dictionary using the abbreviation provided. For example, The English month “November” would be keyed as “Nov” and the French month “Février” would be captured as “Févr”.If the month and corresponding abbreviation are unclear, key the month value as seen.
Years are generally 4 digits but can occasionally be 2 digits. There are also times when the year will be written out rather than in numerical form. This is more common in older records and records in different languages.
Whether a year is spelled out or in numerical form, it should be captured in numerical form. For example, “Eighteen hundred and thirty-two” would be keyed as “1832.”
If only two digits of a year are present on the image, then only those digits should be keyed unless the field help instructs otherwise.
If there is a year range, and the year field help does not specify how to key the range, such as 1932-1933 key the first year in the date range.If there is a death date and an age on the record should we record the birth year? No, we do not calculate dates - only use the dates present on the records.
When dates are represented by both Roman numerals and the Arabic or spelled-out numeral transliteration, the Roman numerals should be ignored. When Roman numerals are present in the absence of any Arabic or spelled-out numeral transliteration, key them as seen within the month, day, or year field they are meant to represent.
Gender will record whether a record is male or female and is sometimes recorded in a specific column or by using a keyword. It can also be captured by inference based on keywords that are language specific. The values will frequently be outlined in a provided dictionary and can also be captured using abbreviations, depending on the situation. Gender should not be inferred from the Given Name.
If the image states that the wife is Male should I correct this? - No, the data should be entered how it appears on the image.
There can be different persons on an image that can relate to a record, such as the main or “primary” person, a spouse, a mother, a father or a child.
Alias or Maiden Name
There are times when there can be more than one version of a name that has been recorded. Occasionally this can be an alternate spelling of the given name or surname. If an alias field has not been included in a project and alias names are found, the name should be ignored.
Often aliases are found in parentheses but you may also see AKA to highlight an alias. For example, the name John '(Johann) Smith (Schmitt)' would be entered with 'John' in the Given Name field, 'Smith' in the Surname field and 'Johann' in the Alias Given name field and Schmitt in the Alias Surname field.
If the record contains both a maiden and married surname, both the maiden and married surnames should be keyed when an Alias Surname field is present. For example: 'Brenda Jones, nee Smith,' would be entered with 'Jones' in the Surname field and 'Smith' in the Alias Surname field. 'Brenda Jones, fly Smith' would be keyed the same way, 'fly' being an abbreviation of 'formerly.'
If there is more than one alias listed on the image and there is only one alias name field, you should only enter the first alias found on the record. The additional aliases should not be entered.Additional lines should not be used for alias names.
Given and Middle Name
The given name is the first name or names of the person.
Middle names should be keyed as part of the Given Name field. For example, if the first name appears as “Alex” and the middle name is “Theodore”, key “Alex Theodore” into the Given Name field.
If there are multiple initials, separate the initials. The initials may be separated with periods, if periods are found on the image, but initials should otherwise be separated with a space. For example, “K.B. Ellsworth” could be keyed as "K.B. Ellsworth" and “KB Ellsworth” should be keyed as “K B Ellsworth”.
When Given Name is missing: If there is no given name, but a surname is present and there is a word or phrase that describes the person in the field, such as “infant son”, “stillborn” or “daughter of John Brown”, that entire value should be keyed as seen into the Given Name field.Where there is no Given Name or Surname mentioned and no word or phrase in its place, leave the Given Name field blank.
Ranks are only keyed in the Prefix field if that instruction is given in the field help. Generally we will include a separate field for keying the rank if we would like it keyed.
Prefix and Suffix
Prefixes are values that precede the given name. If there is no prefix field provided, prefix should not be keyed.
Suffixes are values that follow the surname, such as “Junior” or “Senior”. If there is no suffix field provided, the following common suffixes may be keyed into the surname field, following the surname: “Junior” “Jr” “Senior” “Sr”Note: Suffix values entered into surname fields will be separated out into their own fields in post processing. Only key the values shown above.
- - 'Randolph, Jack, Baron of Friedmar' should be keyed with 'Jack' in the Given Name field, 'Randolf' in the Surname field and 'Baron of Friedmar' in the suffix field.
- - 'Rev John Smith, Jr' should be keyed with 'Rev' in the Prefix field, 'John' in the Given Name field, 'Smith' in the Surname field, and 'Jr' in the Suffix field.
- - 'William Bradley, Esq' should be keyed with 'William' in the Given Name field, 'Bradley' in the Surname field and 'Esq' in the Suffix field.
- Keying Titles
- - 'Prince Charles' should be keyed with 'Prince' in the Prefix field and 'Charles' in the Given Name field.
- - 'Charles Windsor, Prince of Wales' should be keyed with 'Charles' in the Given Name field, 'Windsor' in the Surname field and 'Prince of Wales' as the Suffix.
- - 'Prince of Wales' should be keyed with 'Prince of Wales' in the Given Name field.
- - 'Lady Stewart of Tullybody' should be keyed with 'Lady Stewart of Tullybody' in the Given Name field.
- - 'Duke of Atholl (Sir John William Menses, Bart)' should be keyed with 'Sir' in the Prefix field, 'John William' in the Given Name field, 'Menses' in the Surname field and 'Duke of Atholl' in the Suffix field.
- - 'Sir Robert Menzies of Castle Menzies' should be keyed with 'Sir' in the Prefix field, 'Robert' in the Given Name field, 'Menzies' in the Surname field and 'Castle Menzies' should not be keyed as it is not a part of the name.
- Keying Titles
- Mr. and Mrs.
- 'Mr and Mrs Christopher Anderson' should be keyed as follows:
- - Prefix: Mr
- - Given Name: Christopher
- - Surname: Anderson
- - Spouse Prefix: Mrs
- - Spouse Given Name: empty
- - Spouse Surname: Anderson
- Note: Many projects will not have a Spouse Prefix field
- Mr. and Mrs.
- 'Mr John Chen and Mrs Chen' should be keyed as follows:
- - Prefix: Mr
- - Given Name: John
- - Surname: Chen
- next record
- - Prefix: Mrs
- - Given Name: empty
- - Surname: Chen
The surname is the last name of the person. Depending on the type of record, the surname will be listed differently whether that is prominently at the beginning of the record, following the given name, somewhere in a paragraph or perhaps derived from a different person that is related to that record.
Keying Place Names
Places are the location where an event took place and can be comprised of multiple different levels (such as country, state and city). How these places appear will vary based on the record. Places can frequently be found on a very individual level but can also be found in the header of the image.
Place names should always be keyed as seen, unless the Wiki Article directs otherwise. When keying place names, all unique characters should also be preserved as they appear on the image, including less common forms of punctuation, like a colon ( : ), semi-colon ( ; ), slash ( / ), etc.
- Q: If the image has an incomplete location and I know the county/state/province should I enter it?
- A: No, we do not want to infer information that is not found on the records we are keying.
- Q: If the card states American but the Field Help asks for the Birth country should I key in U.S.A.?
- A: No, you should enter what is on the image.
- Q: Is NY acceptable or should it be changed to N Y ? Or is it keyed as seen?
- A: Places should be keyed as seen, so NY on the image should be keyed as NY.
- Q: If the country no longer exists should I enter the current name of the country?
- A: No, you should key what is entered on the image. If the image states Prussia, Prussia is what should be entered not Germany.
- Q: If I know that the location is misspelled can I correct it?
- A: Unless the Field Help states otherwise, the location name should not be corrected but should be entered as it appears on the image. If the record states Jougoslavia you should key Jougoslavia.
- Q: If there is a city and a country given on the record but the project only contains a general location or residence field, how should I enter it?
- A: Enter it as seen on the record.
- Q: If the record says Jackson County should I enter County?
- A: Yes, unless it is a County field it should be entered as seen on the record.